Mikro Spray Tube 32mm
1. Produk Parameter (spesifikasie) van die mikro spuit buis
|
Mikro spuit buis |
||||||
| deursnee | 25mm | 28mm | 32mm | 40mm | 50mm | 63mm |
| wydte | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
| spuit radius | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
| spuit breedte | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
| 10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
| dikte | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
| gat spasiëring | 10cm, 20cm, 30cm, 40cm | |||||
| gat hoeveelheid | 3, 5, 7, 9 | |||||
| werksdruk | 0,8-1,5 kg / cm² (0,8-1,5 bar) | |||||
| spuit hoogte | 1.5m - 2m | |||||
| Laying length | ≤70m | |||||
| roll lengte | 100m, 150m, 200m | |||||
| Hoeveelheid per akker | 800-1000m / akker | |||||
2. Produk Kenmerk van die mikro spuit buis
(1) vereis lae druk en spaar water.
(2) Dit spuit fyn druppels water eweredig, wat help om die ontkieming koers van sade en die oorlewing van saailinge te verbeter.
(3) Na kunsmis, spuit slang besproeiing help om geleidelik nat die top aangetrek kunsmis, en effektief toe te laat die kunsmis te dring in die grond en bereik plante wortels, sonder die groei van die kunsmis uit.
(4) Dit help om die losheid van grond in stand te hou.
(5) Dit is die mees geskikte toerusting vir besproeiing van sanderige grond en op unleveled landskappe.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) Weerstand teen UV-straling.
(8) Laser drilling, stable quality. Laser punch make uniform holes, to ensure uniform flow of water.
Toepassing van die mikro spuit buis
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube
Eerstens, die installasie metode:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
Video of how to make a end cap for spray tube
(1) Wat is die belangrikste materiaal van mikro spuit buis?
A: PE
(2) Is die mikro spuit buis weerstand teen UV-straling?
A: Ja. 'N hoë gehalte plastiek liggaam bestand UV bestraling
(3) Maksimum gehou lengte vir die plaas?
A: Spray tube can be laid up to 70 meters (according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) Hoeveel meter vir 1 akker plaas?
A: 800-1000m
(5) Kan jy C / O sertifikaat van oorsprong?
A: Ja. C / O, faktuur, verpakking lys, Original B / L
(6) Is jy sprinkel fabriek of handel?
A: Ons is die fabriek. Welkom by ons maatskappy Baoding Anyou Industry Co, Ltd in Baoding China.
