40 milímetros tubo Micro pulverizado
1. Product Specification of the spray tube
tubo de pulverización micro |
||||||
diámetro | 25 milímetros | 28 milímetros | 32 milímetros | 40 milímetros | 50 milímetros | 63 milímetros |
ancho | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
raio de pulverización | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
ancho de pulverización | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
espesor | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
espazamento burato | 10 cm, 20 cm, 30 cm, 40 cm | |||||
burato cantidade | 3, 5, 7, 9 | |||||
Hole size | 0.6mm, 0.7mm, 0.8mm, 1.0mm | |||||
presión de traballo | 0,8-1,5 kg / cm (0,8-1,5 bar) | |||||
altura de pulverización | 1.5m - 2m | |||||
Laying length | ≤70m | |||||
lonxitude do rolo | 100m, 150m, 200m | |||||
Cantidade por acre | 800-1000m / acre |
2. Recursos do produto do tubo de spray de micro
(1) Requírese baixa presión e gardar auga.
(2) É pulverizar finas gotas de auga de xeito uniforme, o que axuda a mellorar a taxa de germinao de sementes ea taxa de supervivencia de plántulas.
(3) Unha vez fertilizantes, irrigación tubo de pulverización axuda a mollar gradualmente ao principio vestida fertilizante, e efectivamente permiten que o fertilizante para penetrar no solo e alcanzar raíces das plantas, sen lavar o fertilizante para fóra.
(4) e axuda a manter a frouxidão do solo.
(5) É o equipo máis axeitado para a irrigación do solo areoso e paisaxes desniveladas.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) resistente á radiación UV.
(8) Laser drilling, stable quality. Laser punch make uniform holes, to ensure uniform flow of water.
A aplicación do tubo de pulverización micro
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube
En primeiro lugar, o método de instalación:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
Video of how to make a end cap for spray tube
(1) Cal é o principal material de tubo de spray de micro?
A: PE
(2) é o tubo de pulverización micro resistentes á radiación UV?
A: Si. corpo calidade plástico de alta resiste a radiación UV
(3) poñer lonxitude máxima para o Farm?
A: Spray tube can be laid up to 70 meters (according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) Cantos metros de granxa 1 acre?
A: 800-1000m
(5) Pode proporcionar o certificado C / O de orixe?
A: Si. C / O, Factura, lista de embalaxe, orixinal B / L
(6) fábrica de rociadores ou negociación?
A: Somos fábrica. Benvido á nosa empresa Baoding Anyou Industry Co, Ltd en Baoding China.