Mikro sprej Tube 28mm
1. Product Specificationof the spray tube
|
cijev mikro sprej |
||||||
| Promjer | 25mm | 28mm | 32mm | 40mm | 50mm | 63mm |
| Širina | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
| radijus sprej | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
| širina raspršivanja | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
| 10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
| Debljina | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
| razmak rupa | 10 cm, 20 cm, 30 cm, 40 cm | |||||
| količina rupa | 3, 5, 7, 9 | |||||
| Hole size | 0.6mm, 0.7mm, 0.8mm, 1.0mm | |||||
| Radni pritisak | 0,8-1,5 kg / cm (0,8-1,5 bar) | |||||
| visina u spreju | 1,5 - 2m | |||||
| Laying length | ≤70m | |||||
| duljina role | 100m, 150m, 200m | |||||
| Količina po hektaru | 800-1000m / ral | |||||
2. svojstva proizvoda od cijevi za prskanje mikro
(1) zahtijeva nizak tlak i spremanje vode.
(2) sprej fine kapljice vode ravnomjerno, što pomaže za poboljšanje brzine klijanja sjemena i preživljenja sadnice.
(3) Nakon gnojiva, crijevo za prskanje navodnjavanje pomaže da postepeno mokro gornji obučen gnojiva i učinkovito dopustiti gnojivo prodrijeti u zemlju i doći do biljke korijena, bez pranja gnojiva van.
(4) pomaže u održavanju zračnost tla.
(5) To je najprikladniji oprema za navodnjavanje pjeskovitom tlu i na neravnoj krajolika.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) otporne na UV zračenje.
(8) Laser drilling technology, stable quality. Laser punch make uniform holes, spray fine drops of water evenly.
Primjena spreja cijevi mikro
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube?
Prvo, instalacijska metoda:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
Video kako napraviti završnu kapu za prskanje cijevi
(1) Što je glavni materijal mikro sprej cijevi?
A: PE
(2) je mikro sprej cijevi otporne na UV zračenje
O: Da. Visoka kvaliteta plastike tijelo podnosi UV zračenja
(3) kojom se maksimalna duljina za farme?
A: Spray tube can be laid up to 70 meters ( according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) Koliko metara za 1 ral farmi?
O: 800-1000m
(5) Možete li mi dati c / o potvrdu o podrijetlu?
O: Da. C / O, račun, pakiranje lista, Izvorni B / L
(6) Jeste li prskalica tvornica ili trgovanje?
O: Mi smo tvornica. Dobro došli na naše tvrtke Baoding Anyou Industry Co, Ltd u Baoding Kini.
