Micro Ịgba tube 40mm
1. Product Specification of the spray tube
|
Micro ịgba tube |
||||||
| dayameta | 25mm | 28mm | 32mm | 40mm | 50mm | 63mm |
| obosara | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
| ịgba okirikiri | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
| ịgba obosara | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
| 10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
| ọkpụrụkpụ | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
| oghere spacing | 10cm, 20cm, 30cm, 40cm | |||||
| oghere buru ibu | 3, 5, 7, 9 | |||||
| Hole size | 0.6mm, 0.7mm, 0.8mm, 1.0mm | |||||
| arụ ọrụ mgbali | 0.8-1.5 kg / cm² (0.8-1.5 mmanya) | |||||
| ịgba elu | 1.5m - 2m | |||||
| Laying length | ≤70m | |||||
| Roll ogologo | 100m, 150m, 200m | |||||
| Ibu kwa acre | 800-1000m / acre | |||||
2. Product Njirimara nke Micro ịgba tube
(1) Chọrọ ala nsogbu na-azọpụta mmiri.
(2) Ọ na ịgba ezi tụlee nke mmiri evenly, nke na-enyere aka melite Germination ọnụego nke osisi na lanarị ọnụego nke seedling.
(3) Mgbe fatịlaịza, ịgba sooks mmiri na-enyere aka nwayọọ nwayọọ mmiri n'elu uwe fatịlaịza, na n'ụzọ dị irè na-ekwe ka fatịlaịza na banye n'ime n'ime ala na-eru osisi mgbọrọgwụ, na-enweghị saa fatịlaịza si.
(4) Ọ na-enyere ịnọgide na-enwe looseness ala.
(5) Ọ bụ ihe kasị mma ngwá maka mmiri nke aja ala na na unleveled Okirikiri.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) eguzogide ọgwụ ka UV radieshon.
(8) Laser drilling, stable quality. Laser punch make uniform holes, to ensure uniform flow of water.
Ngwa nke Micro ịgba tube
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube
mbụ, echichi usoro:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
Video of how to make a end cap for spray tube
(1) Gịnị bụ isi ihe nke Micro ịgba tube?
A: Pee
(2) Ọ bụ na Micro ịgba tube eguzogide UV radieshon?
A: Ee. Elu àgwà plastic aru-alanarị UV radieshon
(3) Oke ebikwasị n'ogologo ugbo?
A: Spray tube can be laid up to 70 meters (according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) Olee otú ọtụtụ mita maka 1 acre ugbo?
A: 800-1000m
(5) Ị na-enye C / O akwụkwọ si?
A: Ee. C / O, Akwụkwọ ọnụahịa, mbukota ndepụta, Original B / L
(6) Ị sprinkler factory ma ọ bụ trading?
A: Anyị bụ factory. Mmadụ Bịa ka anyị ụlọ ọrụ Baoding Anyou Industry Co., Ltd na Baoding China.
