Micro Spray tubo 40 millimetri
1. Product Specification of the spray tube
tubo Micro spruzzo |
||||||
Diametro | 25 millimetri | 28 millimetri | 32 millimetri | 40 millimetri | 50 millimetri | 63 millimetri |
Larghezza | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
raggio dello spruzzo | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
larghezza di spruzzo | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
Spessore | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
spaziatura foro | 10cm, 20cm, 30cm, 40 centimetri | |||||
quantità Hole | 3, 5, 7, 9 | |||||
Hole size | 0.6mm, 0.7mm, 0.8mm, 1.0mm | |||||
Pressione lavorativa | 0,8-1,5 kg / cm (0,8-1,5 bar) | |||||
altezza Spray | 1,5 m - 2m | |||||
Laying length | ≤70m | |||||
lunghezza rotolo | 100m, 150m, 200m | |||||
Quantità per acro | 800-1000m / acro |
2. Caratteristica di prodotto del tubo micro spruzzo
(1) Richiede bassa pressione e risparmiare acqua.
(2) E 'spruzzare gocce sottili di acqua in modo uniforme, che aiuta a migliorare il tasso di germinazione dei semi e il tasso di sopravvivenza di piantina.
(3) Dopo fertilizzanti, l'irrigazione tubo di spruzzo aiuta a bagnare gradualmente il fertilizzante superiore vestite, e in modo efficace consentire il fertilizzante di penetrare nel terreno e raggiungere radici delle piante, senza lavare il fertilizzante fuori.
(4) Aiuta a mantenere la scioltezza del suolo.
(5) È l'apparecchiatura più adatta per l'irrigazione del terreno sabbioso e sui paesaggi unleveled.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) Resistente ai raggi UV.
(8) Laser drilling, stable quality. Laser punch make uniform holes, to ensure uniform flow of water.
Applicazione del tubo micro spruzzo
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube
primo luogo, il metodo di installazione:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
Video of how to make a end cap for spray tube
(1) Che materiale principale del tubo a micro spruzzo?
SCIMMIA
(2) Il tubo micro spruzzo resistente ai raggi UV?
R: Sì. corpo in plastica di alta qualità resiste radiazione UV
(3) La massima che fissa la lunghezza per l'azienda?
A: Spray tube can be laid up to 70 meters (according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) Quanti metri per 1 acri?
A: 800-1000m
(5) Si può fornire il certificato C / O di origine?
R: Sì. C / O, fattura, lista di imballaggio, originale B / L
(6) Sei fabbrica sprinkler o trading?
A: Siamo fabbrica. Benvenuti alla nostra società Baoding Anyou Industry Co., Ltd a Baoding in Cina.