Micro Spray Tube 40mm
1. Product Specification of the spray tube
Micro sprøyterøran |
||||||
Diameter | 25mm | 28mm | 32mm | 40mm | 50mm | 63mm |
Bredde | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
radius spray | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
spray bredde | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
Tykkelse | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
Hullavstand avstand~~POS=HEADCOMP | 10cm, 20cm, 30cm, 40cm | |||||
Hole kvantitet | 3, 5, 7, 9 | |||||
Hole size | 0.6mm, 0.7mm, 0.8mm, 1.0mm | |||||
Arbeids press | 0,8-1,5 kg / cm (0,8 til 1,5 bar) | |||||
spray høyde | 1.5m - 2m | |||||
Laying length | ≤70m | |||||
rullengde | 100m, 150m, 200m | |||||
Antall per acre | 800-1000m / acre |
2. Produkt Funksjon av mikrosprøyterøret
(1) krever lavt trykk og lagre vann.
(2) Det spray fin dråper vann jevnt, noe som forbedrer spirings-hastigheten frø og overlevelsesraten til frøplante.
(3) Etter gjødsel, spray slange vanning bidrar til gradvis å fukte toppen kledd gjødsel, og effektivt å tillate gjødselen til å trenge ned i jorden og når planter røtter, uten å vaske ut den gjødsel.
(4) Den bidrar til å opprettholde løshet jord.
(5) Det er den mest egnet utstyr for vanning av jordsmonnet og på unleveled landskaper.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) bestandig mot UV-stråling.
(8) Laser drilling, stable quality. Laser punch make uniform holes, to ensure uniform flow of water.
Anvendelse av mikro sprøyterøret
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube
første installasjonsmetode:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
Video of how to make a end cap for spray tube
(1) Det er hovedmaterialet i mikrosprøyterøret?
A: PE
(2) er mikrosprøyterøret bestandig mot UV-stråling?
A: Ja. Høy kvalitet plastlegeme som tåler UV-stråling
(3) Maksimal legging lengde for gården?
A: Spray tube can be laid up to 70 meters (according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) Hvor mange meter for en acre gård?
A: 800-1000m
(5) Kan du gi C / O opprinnelsessertifikat?
A: Ja. C / O, faktura, pakkseddel, Original B / L
(6) Er du sprinkler fabrikk eller handel?
A: Vi er fabrikken. Velkommen til vårt selskap Baoding Anyou Industry Co., Ltd i Baoding Kina.