ක්ෂුද්ර මිදුම් ටියුබ් 28mm
1. Product Specificationof the spray tube
ක්ෂුද්ර ඉසින නල |
||||||
විෂ්කම්භය | 25mm | 28mm | 32mm | 40mm | 50mm | 63mm |
පළල | N40mm | N45mm | N50mm | N63mm | N80mm | N100 |
අරය ඉසීමට | 1.5-2.0m | 1.5-2.0m | 1.5-2.5m | 2.0-3.5m | 3.5-4.5m | 5.0-6.0m |
ඉසින පළල | 3-4m | 3-4m | 3-5m | 4-7m | 7-9m | 10-12m |
10m Flow rate | 0.8 m³/h | 1.1 m³/h | 1.3 m³/h | 1.6 m³/h | 2.2 m³/h | 2.8 m³/h |
ඝණකම | 0.2mm (200 micron) to 0.7mm (700 micron) | |||||
කුහරය අතර පරතරය | සෙ.මී. 10, 20cm, 30cm, 40cm | |||||
කුහරය ප්රමාණය | 3, 5, 7, 9 | |||||
Hole size | 0.6mm, 0.7mm, 0.8mm, 1.0mm | |||||
පීඩනය | 0.8-1.5 kg / cm² (0.8-1.5 බාර්) | |||||
ඉසින උස | 1.5m - 2m | |||||
Laying length | ≤70m | |||||
රෝල් දිග | 100m, 150m, 200m | |||||
අක්කරයකට ප්රමාණය | 800-1000m / අක්කර |
2. ක්ෂුද්ර ඉසින නල නිෂ්පාදන විශේෂාංගය
(1) අඩු පීඩන අවශ්යයි හා ජලය සුරකින්න.
(2) එය බීජ ප්රරෝහණය අනුපාතය හා බීජ පැළ පැවැත්ම අනුපාතය වැඩි දියුණු කිරීම සඳහා උපකාරී වන, ඒකාකාරව වතුර දඩ බිංදු ඉසීමට.
(3) පොහොර පසු, ඉසින හෝස් වාරිමාර්ග ක්රම ක්රමයෙන් පොහොර සැරසී ඉහළ තෙත් හා ඵලදායී ලෙස පොහොර බිම කරා ගෙනයන්න සහ පැල මුල් ළඟා කිරීමට ඉඩ, පොහොර පිටතට සෝදමින් තොරව උපකාරී වේ.
(4) ඒ පස looseness පවත්වා ගැනීමට උපකාරී වේ.
(5) ඒ වැලි පස වාරිමාර්ග හා unleveled භූ දර්ශන මත වඩාත් සුදුසු උපකරණ වේ.
(6) Easy to install, save labor costs, economical compared to sprinklers.
(7) UV විකිරණ ප්රතිරෝධ.
(8) Laser drilling technology, stable quality. Laser punch make uniform holes, spray fine drops of water evenly.
ක්ෂුද්ර ඉසින නල අයදුම්
For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, palm tree nursery, dragon fruit, tomato, lawn, etc.
How to install the spray tube?
පළමුව, ස්ථාපන ක්රමය:
1. Prepare the pipe fittings according to the line spacing, and measure the mainline.
2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.
3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.
4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.
5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube.
ඉසින නල සඳහා අවසන් තොප්පිය බවට පත් කර ගන්නේ කෙසේද වීඩියෝ
(1) ක්ෂුද්ර ඉසින නල ප්රධාන ද්රව්ය කුමක් ද?
ඒ: PE
(2) පාරජම්බුල විකිරණ ප්රතිරෝධී ක්ෂුද්ර ඉසින නල ද?
ඔව්. උසස් තත්ත්වයේ ප්ලාස්ටික් ශරීරය UV විකිරණ නොවැටෙන
(3) ගොවිපල සඳහා උපරිම තැබීමේ දිග?
A: Spray tube can be laid up to 70 meters ( according to different size). Pressure must be ensured to be 0.8-1.5 kg / cm².
(4) 1 අක්කර ගොවිපල සඳහා කොපමණ මීටර්?
ඒ: 800-1000m
(5) ඔබට සම්භවයක් සී / O සහතිකය ලබා ගත හැකිද?
ඔව්. සී / O, ඉන්වොයිසිය, ඇසුරුම් ලැයිස්තුව, මුල් බී / පෙළ
(6) ඔබ ජල විදින කර්මාන්ත ශාලාවක් හෝ වෙළෙඳ ද?
ඒ: අපි කර්මාන්ත ශාලාව වේ. අපගේ සමාගම ෙබෝඩිං Anyou කර්මාන්ත සමාගම, ෙබෝඩිං චීනයේ සමාගම ඔබ සාදරයෙන් පිළිගනිමු.